Heavy Duty Work Gloves

Technical Specifications

Key Features

✅ 1.2-1.5mm Full Grain Leather — maximum leather weight in our range — full grain surface with natural grain intact — the thickest, most abrasion resistant leather construction available — significantly outlasts 1.0mm alternatives in extreme use applications

✅ Complete Leather Construction — full grain leather on both palm AND back — no canvas or knit back — complete leather envelope around hand — maximum protection on every surface including back of hand that canvas backs leave vulnerable

✅ Triple Needle Primary Seams — three parallel needle lines at all primary seams — maximum possible seam strength — the additional third stitch line provides a 50% increase in seam strength over double needle construction at the stress points where seam failure causes glove failure

✅ 350D Maximum Grade Nylon Thread — highest grade bonded nylon thread in our range — 350D exceeds the tensile strength of standard 280D by significant margin — maintains seam integrity under forces that would cause lower grade thread to fail

✅ 8-10 Stitch Per Inch Density — higher stitch density than standard work gloves — more stitches per inch means more thread securing each seam segment — reduces the load on each individual stitch — critical for maximum service life under sustained loading

✅ 4 Inch Extended Safety Cuff — minimum 4 inch cuff provides substantial wrist and lower forearm protection — stiffened leather maintains cuff position during heavy work — double closure system ensures cuff stays correctly positioned throughout entire shift

Applications
Heavy demolition — foundry work — steel fabrication — logging — quarrying — offshore — mining adjacent — maximum abrasion industrial environments